en
25
Electrical connection
The socket must be near the appliance
and also freely accessible following
installation of the appliance.
The appliance complies with the
protection class I. Connect the appliance
to 220-240 V/50 Hz alternating current
via a correctly installed socket with
protective conductor. The socket must
be fused with a 10 to 16 A fuse.
For appliances operated in non-
European countries, check whether the
stated voltage and current type match
the values of your mains supply match
the values of the mains supply. This
information can be found on the rating
plate. Fig.
+
ã=
Warning
Never connect the appliance to
electronic energy saver plugs.
Our appliances can be used with mains
and sine-controlled inverters. Mains-
controlled inverters are used for
photovoltaic systems which are
connected directly to the national grid.
Sine-controlled inverters must be used
for isolated applications (e.g. on ships or
in mountain lodges) which are not
connected directly to the national grid.
Getting to know your
appliance
Please fold out the illustrated last page.
These operating instructions refer to
several models.
The features of the models may vary.
The diagrams may differ.
Fig.
1
* Not all models.
1-6
Controls
7
Light switch
8
Light
9
Glass shelf in the refrigerator
compartment
10
“Cool-fresh” container
11
Humidity filter
12
Humidity container
13
Egg rack
14
Shelf for tubes and small tins
15
Shelf for large bottles
A
Freezer section
B
Refrigerator compartment
C
Cool-fresh compartment
Summary of Contents for JC FA Series
Page 1: ...de Gebrauchsanleitung en Instruction for Use nl Gebruiksaanwijzing JC FA...
Page 55: ...1 2...
Page 56: ...3 4 5 6 7 8...
Page 57: ...9 2 4 3 1...
