Juniper TCX1000-RDM20, Hardware Manual

Page: 155 / 206

CHAPTER 25
Locating Component Serial Numbers
• Locating the Serial Number on a TCX1000-RDM20 Chassis or Component on page 141
• Locating the Serial Number on a TCX1000-2D8CMD Chassis and Module on page 143
Locating the Serial Number on a TCX1000-RDM20 Chassis or Component
If you are returning a TCX1000-RDM20or a TCX1000-RDM20 field-replaceable unit
(FRU) to Juniper Networks for repair or replacement, you must locate the serial number
of the device or FRU. You must provide the serial number to the Juniper Networks
Technical Assistance Center (JTAC) when you contact them to obtain a Return Material
Authorization (RMA). See
“Returning a Hardware Component to Juniper Networks, Inc.”
on page 145 .
NOTE: If you want to find the serial number ID label on a component, you
need to remove the component from the chassis, see “Removing a Power
Supply from a TCX1000-RDM20” on page 121 .
NOTE: You must remove the fan module to read the fan serial number from
the serial number ID label. See “Removing a Fan Module from a
TCX1000-RDM20” on page 117 . The fan module serial number cannot be
viewed through the CLI.
•
Locating the Chassis Serial Number ID Label on a TCX1000-RDM20 on page 141
•
Locating the Serial Number ID Labels on FRU Components on page 142
Locating the Chassis Serial Number ID Label on a TCX1000-RDM20
The serial number ID label is located on a label as shown in Figure 55 on page 142 .
141 Copyright © 2019, Juniper Networks, Inc.