Installing the SRX5600 Without a Mechanical Lift
IN THIS SECTION
Overview of Installing the SRX5600 Services Gateway Without a Mechanical Lift | 201
Tools Required to Install the SRX5600 Services Gateway Without a Mechanical Lift | 202
Removing Components from the SRX5600 Chassis Before Installing It Without a Lift | 202
Installing the SRX5600 Services Gateway Chassis in the Rack Manually | 207
Overview of Installing the SRX5600 Services Gateway Without a Mechanical
Lift
If you cannot use a mechanical lift to install the services gateway (the preferred method), you can install
it manually. Before installing the services gateway manually, you must first remove components from the
chassis, and you must reinstall the components once the services gateway is installed in the rack. At least
two people are needed to safely lift the chassis into the rack or cabinet. With components removed, the
chassis weighs approximately 65 lb (29 kg).
Before installing the services gateway in the rack, read the safety information in Chassis Lifting Guidelines.
Remove the services gateway from the shipping container as described in
“Unpacking the SRX5600 Services
. Install the mounting hardware as described in
“Installing the SRX5600 Services
Gateway Mounting Hardware for a Rack or Cabinet” on page 194
NOTE:
An optional air deflector kit is available that lets you install the SRX5600 Services Gateway
in a hot aisle/cold aisle ventilation environment.
201
Summary of Contents for SRX5600
