Juniper SRX550 Hardware Manual Download

Page: 85 / 220

CHAPTER 15

Installing the Services Gateway

IN THIS CHAPTER

Installing the SRX550 Services Gateway in a Rack | 69

Installing an AC Power Supply on the SRX550 Services Gateway | 72

Installing a DC Power Supply on the SRX550 Services Gateway | 73

Installing the SRX550 Services Gateway in a Rack

You can front-mount the SRX550 Services Gateway in a rack. Many types of racks are acceptable, including

four-post (telco) racks, enclosed cabinets, and open-frame racks.

NOTE:

If you are installing multiple devices in one rack, install the lowest one first and proceed

upward in the rack.

To install the services gateway in a rack:

1. Position a mounting bracket on each side of the chassis.

2. Use a Phillips (+) screwdriver, number 2 to install the screws that secure the mounting brackets to the

chassis. Use either the front mount position, as shown in

Figure 14 on page 70

, or the center mount

position as shown in

Figure 15 on page 70

Summary of Contents for SRX550





























































































































































































































Search results

Summary of Contents for SRX550

Reviews:

Related manuals for SRX550

Brands by name

Popular brands

Juniper SRX550, Hardware Manual

Search results

Summary of Contents for SRX550

Reviews:

Related manuals for SRX550

Brands by name

Popular brands