Juniper SRX550, Hardware Manual

Page: 86 / 220

Figure 14: Installing the Rack Mount Brackets (Front Mount Position)
g034107
Figure 15: Installing the Rack Mount Brackets (Center Mount Position)
g034124
3. Have one person grasp the sides of the services gateway, lift it, and position it in the rack.
4. Align the bottom hole in each mounting bracket with a hole in each rack rail, making sure the chassis
is level.
5. Have a second person install a mounting screw into each of the two aligned holes. Use a Phillips (+)
screwdriver, number 2 to tighten the screws.
6. Install the second screw in each mounting bracket.
70