Juniper SRX340 Hardware Manual Download Page 48 | Manualshive

Page: 48 / 150

background image

SRX340 Services Gateway Clearance Requirements for Airflow and Hardware
Maintenance

When planning the installation site for the SRX340 Services Gateway, you need to allow
sufficient clearance around the device. Consider the following:

•

For the operating temperature of the services gateway to be optimal, the airflow around
the chassis must be unrestricted. The fan tray contains four fans and provides
front-to-back chassis cooling.

•

For service personnel to remove and install hardware components, there must be
adequate space at the front and back of the device. Allow at least 24 in. (61 cm) both
in front of and behind the device.

•

If you are mounting the device in a rack with other equipment, or if you are placing it
on the desktop near other equipment, ensure that the exhaust from other equipment
does not blow into the intake vents of the chassis.

For information on the airflow through the SRX340 Services Gateway chassis, see

“Understanding the SRX340 Services Gateway Cooling System” on page 13

Related

Documentation

•

SRX340 Services Gateway Rack-Mounting Requirements and Warnings on page 25

•

SRX340 Services Gateway Rack Size and Strength Requirements on page 29

•

SRX340 Services Gateway Spacing of Mounting Brackets and Flange Holes on page 29

Copyright © 2016, Juniper Networks, Inc.

30

SRX340 Services Gateway Hardware Guide

«
...
46
47
48
49
50
...
»

Summary of Contents for SRX340























































































































































Reviews:

No comments

Related manuals for SRX340

Brand: D-Link Pages: 8

Brand: D-Link Pages: 12

Brand: Vantron Pages: 52

UNIGATE IC - Powerlink

Brand: DEUTSCHMANN AUTOMATION Pages: 50

Brand: Anybus Pages: 2

UNIGATE MB EtherCAT

Brand: DEUTSCHMANN AUTOMATION Pages: 60

Brand: Moxa Technologies Pages: 2

Brand: BAB TECHNOLOGIE Pages: 75

Brand: BURG WATCHER Pages: 21

Brand: Gree Pages: 12

Brand: Honeywell Pages: 60

Brand: Honeywell Pages: 134

Brand: AMI Pages: 11

Brand: IFM Electronic Pages: 65

Brand: IFM Pages: 28

Brand: IFM Pages: 85

myTalker ET7000

Brand: Tekkeon Pages: 2

Brand: TENETICS, LLC Pages: 12

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands