Juniper SRX340 Hardware Manual Download Page 84

Page: 84 / 150

Documentation

SRX340 Services Gateway Software Configuration Overview on page 63

•

Understanding SRX340 Services Gateway Factory-Default Settings on page 64

•

Accessing J-Web on the SRX340 Services Gateway on page 66

•

Configuring the SRX340 Services Gateway Using the J-Web Setup Wizard on page 67

•

Accessing the CLI on the SRX340 Services Gateway on page 69

•

Connecting to the SRX340 Services Gateway from the CLI Remotely on page 71

•

Configuring the SRX340 Services Gateway Using the CLI on page 71

Accessing J-Web on the SRX340 Services Gateway

The J-Web interface is a Web-based graphical interface that allows you to operate a
services gateway without commands.

NOTE:

To access the J-Web interface, your management device requires one

of the following supported browsers:

•

Microsoft Internet Explorer version 9.0 or 10.0

•

Mozilla Firefox versions 24 through 38

•

Google Chrome versions 27 through 43

To access J-Web:

Connect the management port MGMT to the Ethernet port on the management device,
using an RJ-45 cable as shown in

Figure 11 on page 66

Figure 11: Connecting to the Management Port on the SRX340 Services
Gateway

Configure a static IP address in the 192.168.1.0/24 network for the management device.
Do not assign the 192.168.1.1 IP address to the management device, as this IP address

SRX340 Services Gateway Hardware Guide

Summary of Contents for SRX340

























































































































Search results

Summary of Contents for SRX340

Reviews:

Brands by name

Popular brands

Juniper SRX340, Hardware Manual

Search results

Summary of Contents for SRX340

Reviews:

Brands by name

Popular brands