Juniper SRX-4600, Hardware Manual

Page: 65 / 210

Table 32: Parts List for a Fully Configured Services Gateway
Quantity Component
1 Services gateway
2 AC or DC Power supply (preinstalled)
2 AC power cord appropriate for your geographical location (only for AC models)
1 Rack mount kit
1 End User License Agreement
1 Documentation Roadmap Card
1 Safety Guide
1 USB flash drive with Junos OS
1 DB-9 to RJ-45 cable
Mounting an SRX4600 Services Gateway on Four
Posts of a Rack or Cabinet
You can mount an SRX4600 services gateway on four posts of a 19-in. rack or cabinet by using the
separately orderable four-post rack-mount kit. The remainder of this topic uses rack to mean rack or cabinet.
Before mounting the services gateway on four posts of a rack:
•
Verify that the site meets the requirements described in “Site Preparation Checklist for the SRX4600
Services Gateway” on page 45 .
•
Place the rack in its permanent location, allowing adequate clearance for airflow and maintenance, and
secure it to the building structure.
•
Read “General Safety Guidelines and Warnings” on page 149 , with particular attention to “Chassis and
Component Lifting Guidelines” on page 159 .
Ensure that you have the following parts and tools available:
67