Juniper SRX-4600, Hardware Manual

Page: 52 / 210

RJ-45 Management Port Connector Pinout Information
Table 24 on page 54 provides the pinout information for the RJ-45 connector for the management port
on Juniper Networks devices.
Table 24: RJ-45 Management Port Connector Pinout Information
Description Signal Pin
Transmit/receive data pair 1 TRP1+ 1
Transmit/receive data pair 1 TRP1— 2
Transmit/receive data pair 2 TRP2+ 3
Transmit/receive data pair 3 TRP3+ 4
Transmit/receive data pair 3 TRP3— 5
Transmit/receive data pair 2 TRP2— 6
Transmit/receive data pair 4 TRP4+ 7
Transmit/receive data pair 4 TRP4— 8
Console Port Connector Pinout Information
The console port on a Juniper Networks device is an RS-232 serial interface that uses an RJ-45 connector
to connect to a console management device. The default baud rate for the console port is 9600 baud.
Table 25 on page 55 provides the pinout information for the RJ-45 console connector.
NOTE: If your laptop or PC does not have a DB-9 male connector pin and you want to connect
your laptop or PC directly to a device, use a combination of the RJ-45 to DB-9 female adapter
and a USB to DB-9 male adapter. You must provide the USB to DB-9 male adapter.
54