After logging into the NSMXpress Web interface, NSMXpress provides you with the
following installation options:
•
Configuring Basic Settings on page 9
•
Configuring High Availability on page 11
•
Advanced Options on page 14
•
Installing NSM Software on page 17
Configuring Basic Settings
To install the regional server or central manager software using the minimum
requirements:
1.
Install your NSMXpress hardware as described in “Hardware Installation” on page 4.
2.
Boot and setup your NSMXpress appliance as described in “Initial Setup Configuration”
on page 6.
3.
Enter the
https://<ip>/administration
URL for your appliance in a Web browser. See
“Web Interface Configuration” on page 8 for details.
4.
Log into the Web interface. The
System Info
page opens.
5.
Click the link
Install NSM Regional Server
(see Figure 2 on page 10) to go to the Install
Regional Server window or click the
Install NSM Central Manager
link to view the Install
NSM Central Manager window (see Figure 3 on page 10), as the case may be.
NOTE:
The “admin” user default username is admin and the password is
the one you created in Step 6 of “Boot NSMXpress” on page 7.
9
Copyright © 2010, Juniper Networks, Inc.
Configuring the NSM Software
