MX2010 Router Grounding Specifications
MX2010 Chassis Moving Guidelines | 129
MX2010 Backplane Description
The MX2010 router consist of a signal backplane and a power backplane that connects PSMs and PDMs
to the chassis. The adapter cards (ADCs) are carrier cards used to house the MPCs. The MPCs install into
the bottom card-cage backplanes from the front of the chassis and mate to the signal backplane to connect
to the Switch Fabric Boards (SFBs) and the Control Board and Routing Engines (CB-REs). The backplane
connects 10 line cards to 8 SFBs and 2 CB-REs. The SFBs and CB-REs install into the top from the front
of the chassis. The PSMs install into the bottom power backplane, and the PDMs mate to the bottom
power backplane. The cooling system components also connect to the top and bottom backplane.
The backplane performs the following major functions:
•
Data path—Data packets are transferred across the backplane between the MPCs through the fabric
ASICs on the SFBs.
•
Power distribution—The router PDMs relay power from the feeds to the input of the PSMs through the
power midplane. In addition, the output power from PSMs is distributed to the components of the chassis
(MPCs, SFBs, and CB-REs), using the power backplane.
•
Control/management path—The backplane provides management and control path connectivity among
the various system components.
RELATED DOCUMENTATION
MX2010 Chassis Description | 7
MX2010 Modular Port Concentrator Description | 70
MX2000 Switch Fabric Board (SFB) Overview | 66
MX2000 Host Subsystem CB-RE Description | 51
MX2010 Modular Interface Card Description | 79
MX2010 Power System Description | 95
MX2010 Power Midplane Description | 100
13
Summary of Contents for MX2010
