Figure 13: Loading the MX2008 Router onto the Pallet Jack
5.
Attach the shipping brackets to the pallet jack attachment by using the existing bracket
screws.
6.
On each of the shipping brackets, partially insert screws into the holes to secure the
brackets to the chassis. Tighten all screws. These brackets help prevent the chassis
from tilting.
7.
Lower the pallet jack before moving the chassis. Doing this helps distribute the weight
evenly and reduces the risk of tilting or damage to the chassis.
NOTE:
An empty MX2008 router weighs approximately 261 lb (118.39 kg).
8.
Using the pallet jack, position the router in front of the rack or cabinet, centering it in
front of the rack.
NOTE:
If you are installing the MX2008 router into a network cabinet,
make sure that no hardware, device, rack, or cabinet component obstructs
the 24-U rack space from access during installation.
9.
Using the pallet jack, lift the chassis approximately 0.75 in. (1.9 cm) above the surface
of the mounting shelf (four-post rack) or bottom opening of the rack (open-frame
rack), and position it as close as possible.
NOTE:
Because of the short lift capability of the pallet jack, we recommend
that you install the router on the bottom of the rack.
Copyright © 2017, Juniper Networks, Inc.
22
MX2008 3D Universal Edge Router Quick Start
