3.
Set the user account class to
super-user
.
[edit]
root@#
set system login user
user-name
class super-user
Configure System Attributes
For more information about configuring the backup routing and static routes, see the
Junos OS Administration Library
.
1.
Configure the name of the router. If the name includes spaces, enclose the name in
quotation marks (“ ”).
[edit]
root#
set system host-name
host-name
NOTE:
The DNS server does not use the hostname to resolve to the correct
IP address. This hostname is used to display the name of the Routing
Engine in the CLI. For example, the configured values for the user-name
and host-name variables appear on the command prompt in the following
format when the user is logged in to the CLI:
user-name
@
host-name
>
2.
Configure the IP address of the DNS server.
[edit]
root#
set system name-server
address
3.
Configure the router’s domain name.
[edit]
root#
set system domain-name
domain-name
4.
Configure the IP address and prefix length for the router’s management Ethernet
interface.
[edit]
root #
set interfaces fxp0 unit 0 family inet address
address/prefix-length
5.
Configure the IP address of a backup Routing Engine. The backup Routing Engine is
used while the local router is booting and if the routing process fails to start. After the
routing process starts, the backup Routing Engine address is removed from the local
routing and forwarding tables.
[edit]
root#
set system backup-router
address
6.
(Optional) Configure the static routes to remote subnets with access to the
management Ethernet port. Access to the management Ethernet port is limited to
the local subnet. To access the management Ethernet port from a remote subnet,
you must add a static route to that subnet within the routing table.
[edit]
root#
set routing-options static route
remote-subnet
next-hop
destination-IP
retain no-readvertise
Copyright © 2017, Juniper Networks, Inc.
62
MX2008 3D Universal Edge Router Quick Start
