Juniper JUNOSe 10.3.2, Release Note

Page: 24 / 118

JunosE 10.3.2 Release Notes
16 „
Known Behavior
mark-de Policy List Configuration mark-de in Classifier Group
Configuration mode
mark-exp Policy List Configuration mark-exp in Classifier Group
Configuration mode
mark-user-priority Policy List Configuration mark-user-priority in
Classifier Group
Configuration mode
mpls ldp discovery
transport-address Interface Configuration This command has no effect
in Interface Configuration
mode. Now available in
Global Configuration mode.
mpls topology-driven-lsp
ip-interfaces Global Configuration ldp ip-forwarding
[ no ] next-hop Policy List Configuration forward next-hop in
Classifier Group
Configuration mode
[ no ] next-interface Policy List Configuration forward interface in
Classifier Group
Configuration mode
nrzi-encoding Interface Configuration
no ospf enable Router Configuration ospf shutdown
policy-list Global Configuration ip policy-list
radius disconnect client Global Configuration
The RADIUS Disconnect
Configuration mode has
been removed from the CLI.
subscriber disconnect
rate-limit-profile Policy List Configuration rate-limit-profile in Classifier
Group Configuration mode
remote-loopback Controller Configuration
show controllers t1/e1 User Exec, Privileged Exec
show controllers t1 remote User Exec, Privileged Exec
show ike certificates User Exec, Privileged Exec show ipsec certificates
show ike configuration User Exec, Privileged Exec show ipsec ike-configuration
show ike identity User Exec, Privileged Exec show ipsec identity
show ike policy-rule User Exec, Privileged Exec show ipsec ike-policy-rule
show ike sa User Exec, Privileged Exec show ipsec ike-sa
show ip dhcp-external binding Privileged Exec show dhcp binding
show ip dhcp-external binding-id Privileged Exec show dhcp binding
show ip dhcp-local binding Privileged Exec show dhcp binding
show ip dynamic-interface-prefix Privileged Exec, User Exec None
show ip mirror interface Privileged Exec show secure policy-list
show license l2tp-session User Exec, Privileged Exec None
t1 lineCoding Controller Configuration None. This command never
had any effect.
Deprecated Command Command Mode Preferred Command