i.
Type
1
and press Enter.
ii.
Type the IPv4 address for eth0 interface in dotted-decimal notation and
press Enter.
iii.
Type the subnet mask for the IPv4 address and press Enter.
iv.
Type the IPv4 address of the default gateway in dotted-decimal notation
and press Enter.
•
(Optional) To configure both IPv4 and IPv6 address for the eth0 interface:
i.
Type
2
.
ii.
Type the IPv4 address for eth0 interface in dotted-decimal notation and
press Enter.
iii.
Type the subnet mask for the IPv4 address and press Enter.
iv.
Type the IPv4 address of the default gateway in dotted-decimal notation
and press Enter.
v.
Type the IPv6 address and prefix for the eth0 interface and press Enter.
vi.
Type the IPv6 address of the default gateway for the eth0 interface and
press Enter.
c.
Type the IPv4 address of the name server for the eth0 interface and press Enter.
d.
Type the IPv6 address of the name server for the eth0 interface and press Enter.
e.
Specify whether you want to configure a separate interface for device
management or not:
•
Type
Y
if you want to use a different Ethernet interface (eth3) to manage
devices.
NOTE:
On a Junos Space fabric with two or more Junos Space
nodes, if you configure the eth3 interface as the device
management interface on one Junos Space node, then you must
also configure the eth3 interface as the device management
interface on all the other Junos Space nodes in that fabric.
19
Copyright © 2018, Juniper Networks, Inc.
Step 6: Configure the JA2500 Appliance