Juniper Junos Space JA2500, Quick Start Manual

Page: 13 / 29

4.
Remove the screws on the terminals by using the screwdriver. Save the screws.
5.
Connect the stripped and twisted wires to wire clamps under the DC terminal screws
as shown in
Figure 7 on page 13 .
Figure 7: Connecting a DC Power Supply
6.
Use the terminal screws to secure the power source cables to the power feed on the
appliance by attaching the twisted wires that are attached to the cables to the
appropriate terminals.
7.
Remove the screw on the grounding terminal by using the screwdriver. Save the screw.
The grounding terminal is located to the right and above the terminals, as shown in
Figure 8 on page 13 .
Figure 8: DC Power Supply Grounding
g000234
8.
Connect the grounding lug to the earthing terminal using the screw, as shown in
Figure 8 on page 13 .
13 Copyright © 2018, Juniper Networks, Inc.
Connecting DC Power to the JA2500 Appliance