Juniper FIELD PC, Owner'S Manual

Page: 30 / 94

30
Field PC Owner’s Manual
PC Card Installation
A PC card can be used to expand the memory and peripheral
capabilities of the Field PC. The PC card slot is also capable
of taking an SD or CF card with an adapter. To install a card
complete the following steps:
1. Use a screwdriver to open the back compartment door.
2. Insert the card socket-first with the front of the card facing
up. Gently push it in until it stops.
3. Close the door to the card slot and reattach the back
compartment door.
Note: Be careful when inserting and removing cards. Excess force
could damage the card and the card drive.
To remove a card from the slot push the eject button, grasp the
card firmly and pull it out.
Micro SD Card Installation
A Micro SD card holder is located at the back of the unit.
Installing a card improperly can result in damage to the unit
not covered by the warranty. To properly install a Micro SD
card complete the following steps:
1. Use a screwdriver to open the back compartment door.
2. Gently lift the flap located in the top right corner of the
board protector.