Juniper EX9208, Hardware Manual, Page: 84 / 396

You can use the
show version
command to see the version of Junos OS for EX Series
switches loaded on the switch.
Line Card Components
The EX9200-MPC line card has:
•
Two slots that can accept any of the following MICs:
•
EX9200-10XS-MIC, which has ten 10-Gigabit Ethernet ports, each of which can
house small form-factor pluggable plus (SFP+) transceivers. The ports form one
port group. The ports support 10GBASE-SR, 10GBASE-LR, 10GBASE-ER, and
10GBASE-ZR transceivers. An LED labeled
OK/FAIL on the MIC indicates the status
of the MIC. See “Modular Interface Card LED in an EX9200 Switch” on page 34 . The
MIC is shipped with 10 dust covers for the 10 ports. See Figure 28 on page 60 .
Figure 28: EX9200-10XS-MIC
3— 1— MIC power button LEDs for the ports
4— 2— MIC LED 10-Gigabit Ethernet ports
• EX9200-20F-MIC, which has twenty 1-Gigabit Ethernet ports with Media Access
Control Security (MACsec) capability, each of which can house 1-gigabit small
form-factor pluggable (SFP) transceivers. The EX9200-20F-MIC in EX9200-MPC
line card supports 802.1AE IEEE MAC Security standard (also known as MACsec)
with AES-128 bit encryption, providing support for link-layer data confidentiality,
data integrity, and data origin authentication. You must apply a single
license—EX9200-SFL—to enable MACsec. The ports are divided into two port groups
of ten ports each. The ports labeled
[0/2]/0
through
[0/2]/8
and
[1/3]/0
through
[1/3]/8
form one port group and the ports labeled
[0/2]/1
through
[0/2]/9
and
[1/3]/1
through
[1/3]/9
form another port group. These ports support 1000BASE-T,
1000BASE-SX, 100BASE-FX, 1000BASE-LX, 1000BASE-BX-U, 1000BASE-BX-D,
100BASE-BX-U, 100BASE-BX-D, and 1000BASE-LH transceivers. An LED labeled
OK/FAIL on the MIC indicates the status of the MIC. See “Modular Interface Card
LED in an EX9200 Switch” on page 34 . The MIC is shipped with 20 dust covers for
the 20 ports. See Figure 29 on page 61 .
Copyright © 2017, Juniper Networks, Inc. 60
EX9208 Switch Hardware Guide