Juniper EX9208, Hardware Manual, Page: 85 / 396

Figure 29: EX9200-20F-MIC
3— 1— MIC LED LEDs for the ports
4— 2— MIC power button 1-Gigabit Ethernet ports
• EX9200-40T-MIC, which has 40 RJ-45 ports, which can accept RJ-45 connectors.
The ports are divided into three port groups. The ports labeled
0/1
through
1/5
and
0/0
through
1/4
form port group
pic0
, the ports labeled
1/7
through
2/3
and
1/6
through
2/2
form port group
pic1
, and the ports labeled
2/5
through
3/9
and
2/4
through
3/8
form port group
pic2
. An LED labeled
OK/FAIL
on the MIC indicates the
status of the MIC. See “Modular Interface Card LED in an EX9200 Switch” on page 34 .
See Figure 30 on page 61 .
Figure 30: EX9200-40T-MIC
4— 1— MIC power button Link/Activity LED for the ports
5— 2— MIC LED Status LED the ports
3—RJ-45 ports
•
Cover panels—Two cover panels that cover the MIC slots.
• Line card LED—An LED labeled OK/FAIL , which indicates the status of the line card.
See “Line Card LED in an EX9200 Switch” on page 71 .
• Network port LEDs—Each port on the EX9200-10XS-MIC and each port on the
EX9200-20F-MIC has an LED, the Link/Activity LED, which indicates the link status
and activity on the port. Each port on the EX9200-40T-MIC has another LED, the Status
LED, which indicates the status of the port parameters. See
“Network Port LEDs on
Line Cards in an EX9200 Switch” on page 33 .
Related
Documentation
Line Card Model and Version Compatibility in an EX9200 Switch on page 51
•
•
Pluggable Transceivers Supported on EX9200 Switches on page 103
61 Copyright © 2017, Juniper Networks, Inc.
Chapter 5: Line Cards