Juniper EX9208 Hardware Manual Download Page 334

Page: 334 / 396

Table 70: Backup Routing Engine Alarms

(continued)

Remedy

Alarm
Severity

Alarm Condition

Chassis
Component

•

Reboot the system with the board
reset button on the backup Routing
Engine.

•

If the alarm recurs, open a support
case using the Case Manager link
at

http://www.juniper.net/support/

or call 1-888-314-5822 (toll free,
US & Canada) or 1-408-745-9500
(from outside the United States).

Minor
(yellow)

The backup Routing Engine
reports a multibit ECC error.

Multibit
Memory
ECC

Documentation

Field-Replaceable Units in an EX9200 Switch on page 16

•

Craft Interface in an EX9200 Switch on page 19

•

Understanding Alarm Types and Severity Levels on EX Series Switches on page 301

Monitoring System Log Messages

Purpose

NOTE:

This topic applies only to the J-Web Application package.

Use the monitoring functionality to filter and view system log messages for EX Series
switches.

Action

To view events in the J-Web interface, select

Monitor

Events and Alarms

View Events

Apply a filter or a combination of filters to view messages. You can use filters to display
relevant events.

Table 71 on page 310

describes the different filters, their functions, and

the associated actions.

To view events in the CLI, enter the following command:

show log

Table 71: Filtering System Log Messages

Your Action

Function

Field

To specify events recorded in a particular file,
select the system log filename from the
list—for example,

messages

Select

Include archived files

to include

archived files in the search.

Specifies the name of a system log file for which
you want to display the recorded events.

Lists the names of all the system log files that you
configure.

By default, a log file,

messages

, is included in the

/var/log/

directory.

System Log File

310

EX9208 Switch Hardware Guide

Summary of Contents for EX9208














































































































































































































































































































































































Search results

Summary of Contents for EX9208

Reviews:

Juniper EX9208, Hardware Manual, Page: 334 / 396

Search results

Summary of Contents for EX9208

Reviews: