Juniper EX9208, Hardware Manual, Page: 182 / 396

NOTE: All line cards ordered are shipped separately. Line cards are not listed
on the switch’s packing list.
NOTE: The base configuration is available only with AC power supplies. The
redundant configuration ships with either AC or DC power supplies.
Table 63 on page 158 lists the parts and their quantities in the packing list for a base
configuration and a redundant configuration switch.
Table 63: Parts List for Different EX9208 Switch Configurations
Redundant Configuration
Quantity
Base Configuration Quantity Component
1 1 Chassis, including the
midplane and front-mounting
brackets
2 1 Routing Engine module (RE
module)
2 1 Switch Fabric module (SF
module)
4 AC (low-line or high-line) or
4 DC One of the following:
• 3 low-line (100–120 VAC)
AC
•
2 high-line (200–240 VAC)
AC
Power supplies
1 1 Fan tray
1 1 Air filter
• Line card cover panels: 6 • Line card cover panels: 6
• SF module cover panel: 1
• Power supply cover panels:
1 or 2
Cover panels for slots without
installed components
Table 64 on page 158 lists the parts contained in the accessory box. The same accessories
ship with both configurations of the switch.
Table 64: Accessory Box Parts List
Quantity Part
22 Screws to mount chassis and small shelf
8 DC power terminal Lugs, 6 WG
Copyright © 2017, Juniper Networks, Inc. 158
EX9208 Switch Hardware Guide