Juniper EX4550 Hardware Manual Download Page 74 | Manualshive

Page: 74 / 330

Juniper EX4550 Hardware Manual Download Page 74

Table 26: System Information

(continued)

Description

Field

Indicates the following:

•

For EX3200 switches; and for EX2200, EX2200-C, EX3300,
EX4200, EX4300, EX4500, and EX4550 switches that are
not configured as Virtual Chassis, the value displayed in
Inventory details field is always 1 FPC. FPC is a legacy term
for a slot in a large Juniper Networks chassis; which simply
refers to the standalone switch.

•

For EX2200 and EX2200-C switches configured as a Virtual
Chassis, the value displayed in the Inventory details field is
1–4 FPC, with the number corresponding to the number of
member switches.

•

For EX3300 switches configured as a Virtual Chassis, the
value displayed in the Inventory details field is 1–6 FPC, with
the number corresponding to the number of member
switches.

NOTE:

For Junos OS Release 14.1X53-D10 and later, EX3300

switches configured as a Virtual Chassis display the value
1–10 FPC in the Inventory details field.

•

For EX4200, EX4500, and EX4550 switches configured as
a Virtual Chassis, the value displayed in the Inventory details
field is 1–10 FPC, with the number corresponding to the
number of member switches.

•

For EX6210 switches, the values displayed in the Inventory
details field are 1–2 CB and 1–9 FPC. CB, or Control Board,
refers to the SRE module. FPC refers to line cards and the
FPC within the CB.

•

For an EX8208 switch, the values displayed in Inventory
details field are 1–3 CB and 0–8 FPC. CB, or Control Board,
refers to SRE and SF modules. FPC refers to line cards.

•

For EX8216 switches, the values displayed in Inventory
details field are 1–2 CB and 0–16 FPC. CB, or Control Board,
refers to RE modules and FPC refers to line cards.

•

For an XRE200 External Routing Engine in an EX8200 Virtual
Chassis, the value displayed in Inventory details is 1 XRE.
XRE refers to RE modules. For XRE200 External Routing
Engines configured as a Virtual Chassis, the values displayed
in Inventory details are 1–2 XRE and 0–4 LCC, where LCC
refers to the EX8200 line card chassis.

Inventory details

Indicates the version of the Junos OS image. In a Virtual Chassis
configuration, the Junos OS image of the master switch is
displayed by default. To display the Junos OS image of a
specific switch, click the image of that switch.

Junos image

Indicates the version of the boot image that is used. In a Virtual
Chassis configuration, the boot image of the master switch is
displayed by default. To display the boot image of a specific
switch, click the image of that switch.

Boot image

Copyright © 2015, Juniper Networks, Inc.

52

EX4550 Switch Hardware Guide

«
...
72
73
74
75
76
...
»

Summary of Contents for EX4550











































































































































































































































































































































Reviews:

No comments