Juniper EX4550 Hardware Manual Download Page 43 | Manualshive

Page: 43 / 330

Juniper EX4550 Hardware Manual Download Page 43

Table 7: LCD Panel Menu Options in EX4550 Switches

Description

Menu Label

In the Idle menu:

•

Press Enter to cycle through the Status LED modes, which are port status indicators:

•

ADM (administrative status)

•

DPX (duplex)

•

SPD (speed)

See

“Network Port and Expansion Module Port LEDs in EX4550 Switches” on page 30

for information

about the Status LED modes.

•

Press Menu to exit the Idle menu and go to the Status menu.

IDLE

In the Status menu, press Menu to cycle through the following information:

•

VCPs status: Up or Down

Display the status of VCPs on the Virtual Chassis module installed on the front panel followed by the
status of VCPs on the Virtual Chassis module installed on the rear panel of the switch.

•

Power supply status: OK, Failed, or Absent.

•

Fan status and Temperature status.

•

Fan status: OK, Failed, or Absent

•

Temp status: OK, High, or Shutdown

•

Junos OS version for EX Series switches loaded on the switch.

•

EXIT STAT MENU?

Choose one of the following:

•

Press Enter to exit the Status menu and go to the Maintenance Menu.

•

Press Menu to display the status of the VCPs again.

You can disable the Status menu or the options in the Status menu in the LCD panel. See

“Configuring the

LCD Panel on EX Series Switches (CLI Procedure)” on page 193

.

STATUS

21

Copyright © 2015, Juniper Networks, Inc.

Chapter 2: Chassis Components and Descriptions

«
...
41
42
43
44
45
...
»

Summary of Contents for EX4550











































































































































































































































































































































Reviews:

No comments