Juniper EX4550 Hardware Manual Download Page 329

Page: 329 / 330

Nonregulatory Environmental Standards

NEBS compliance

—These EX Series switches are Network Equipment Building System

(NEBS) compliant:

•

EX2200-24T and EX2200-48T

•

EX3200-24T, EX3200-48T

•

EX3300-24T, EX3300-48T

•

EX4200-24T, EX4200-24F, EX4200-24F-S, EX4200-48T and EX4200-48T-S

•

EX4300-24T, EX4300-24T-S, EX4300-24P, EX4300-24P-S, EX4300-32F,
EX4300-32F-S, EX4300-48T, EX4300-48T-AFI, EX4300-48T-S, EX4300-48P, and
EX4300-48P-S

•

All EX4500 switches with AC power supplies

•

EX4550-32T-AFO, EX4550-32T-AFI, EX4550-32F-AFO, EX4550-32F-AFI, and
EX4550-32F-S

•

EX4600-40F and EX4600-40F-S

•

All EX6200 switches

NOTE:

For the EX6200-48P line cards, the intra-building ports must use

shielded intra-building cabling or wiring that is grounded at both ends.

•

All EX8200 switches

Those switch switches meet the following NEBS compliance standards:

•

SR-3580 NEBS Criteria Levels (Level 4 Compliance)

•

GR-1089-CORE: EMC and Electrical Safety for Network Telecommunications Equipment

•

GR-63-CORE: NEBS, Physical Protection

•

The equipment is suitable for installation as part of the Common Bonding Network
(CBN).

•

The equipment is suitable for installation in locations where the National Electrical
Code (NEC) applies.

•

The battery return connection is to be treated as an Isolated DC return (DC-I), as
defined in GR-1089-CORE.

Documentation

Agency Approvals for EX Series Switches on page 303

•

Compliance Statements for Acoustic Noise for EX Series Switches on page 308

307

Chapter 31: Agency Approvals and Compliance Statements

Summary of Contents for EX4550













































































































































































































































































































Search results

Summary of Contents for EX4550

Reviews:

Juniper EX4550, Hardware Manual, Page: 329 / 330

Search results

Summary of Contents for EX4550

Reviews: