Juniper Advanced Threat Prevention Appliance Cli Command Reference Manual Download Page 89

Page: 89 / 120

CLI Command Reference Guide

shutdown

traceroute

updateimage

Table 4-21 shutdown

Description

Shuts down the Juniper ATP Appliance server.

Product(s) CLI

All-in-One | Collector | Core CM | Mac Mini OS X Detection Engine

Mode(s)

Server

Syntax

shutdown

Parameters

None

Example

The following example performs a shutdown of the current device.

JATP# shutdown

Table 4-22 traceroute

Description

Displays the route packets trace to a host name or an IP address.

Product(s) CLI

All-in-One | Collector | Core CM | Mac Mini OS X Detection Engine

Mode(s)

Server

Syntax

traceroute

Parameters

Example

The following example performs a traceroute of the named device.

MacOSX1# traceroute -h 2 MacMininOSX2-Engine

Description

Update or correct the guest-image OS profile used by the MAC OS X detection and
analysis behavioral engine.

The updateimage command will update the guest images from a USB drive
attached to the Juniper ATP Appliance.

Product(s) CLI

Mac Mini OS X Detection Engine

Mode(s)

Core

Syntax

updateimage

-h unsigned
integer

Specifies the number of hops

string

Names the remote system to be traced.

Summary of Contents for Advanced Threat Prevention Appliance




















































































































Search results

Summary of Contents for Advanced Threat Prevention Appliance

Reviews:

Juniper Advanced Threat Prevention Appliance, Cli Command Reference Manual, Page: 89 / 120

Search results

Summary of Contents for Advanced Threat Prevention Appliance

Reviews: