manualshive.com logo in svg

Juniper Advanced Threat Prevention Appliance, Cli Command Reference Manual, Page: 108 / 120

Share
Download
Juniper Advanced Threat Prevention Appliance Cli Command Reference Manual Download Page 108

Juniper Advanced Threat Prevention Appliance

100

Copyright© 2018, Juniper Networks, Inc.

set (server mode)

Table 5-19  set

Description

Configure the system settings.

Product(s) CLI

A

ll-in-One | Collector | Core CM | Mac Mini OS X Detection 

Engine

Mode(s)

Server, See Also: set (diagnosis mode); set proxy (collector mode)

Syntax

set [autoupdate {on | off} | cli timeout 

secs 

| clock | cm 

address 

| support {on | off} | 

passphrase 

string 

| dns | firewall 

{all <backup | flush> | whitelist} | hostname 

string 

| ip 

{interface

 

| 

dhcp

 

| 

address 

| 

netmask 

| 

gateway} 

| ntpserver | 

password | proxy {config | enabled | remove} |timezone 

string 

| uipassword]

Parameters

(See columns below)

autoupdate 
{software| 
content} {on|off}

Turn on or off the automatic product update feature. 

autoupdate {software| content} {on|off}

example: 

set autoupdate content on

cli timeout secs 

Set CLI timeout period in seconds (0 indicates no timeout).

clock

Sets the current date and time.

cm address

Sets the IP address of the Central Manager and netmask using the slash notation; 
example: AAA.BBB.CCC.DD/x

set support 
{enable | disable} 
| {localmode}

Enables remote SSH login “support” account or 
localmode enable|/disable.

passphrase string

Sets the device key password; enter a string.

dns

Sets the DNS servers (or enable DHCP for DNS) for the management interface 
eth0. 

firewall {all 
<backup | flush> | 
whitelist <add | 
delete | flush>}

Backs up or flushes (clears) all current iptables for a firewall, or adds, deletes or 
flushes the current iptables whitelist-specific settings for the firewall. 

The “add” option adds an IP address to the iptables outbound whitelist.

# set firewall whitelist add 10.1.1.1

Whitelist rules rely on normal service shutdown to be backed up. Powering off a VM 
directly will lose the whitelist state as rules cannot be saved in that case

hostname string 

Sets the system’s host name.

ip {interface | 
dhcp | address | 
netmask |gateway}

Sets the IP address, netmask, or default gateway, or enables DHCP for the 
management interface eth0. 

ntpserver

Sets the Network Time Protocol (NTP) server.

password

Sets a new password for the CLI administrator.

Summary of Contents for Advanced Threat Prevention Appliance

























































































































Reviews:

No comments