Juniper Advanced Threat Prevention Appliance, Cli Command Reference Manual, Page: 39 / 120

CLI Command Reference Guide
Copyright© 2018, Juniper Networks, Inc. 31
show (collector mode)
show (collector mode)
Table 2-27 show (collector mode)
Description
Displays the Traffic Collector HOMENET settings and all configured subnets, as well
as current traffic filters and the current XFF status (enabled or disabled)
Product(s) CLI All-in-One | Collector
Mode(s) Collector
Subcommands
homenet | traffic-filter | proxy | honeypot
Syntax
show
Parameters
Example
The following example displays the current Collector proxy inside settings:
collector02(collector)# show proxy inside
Proxy IPs: 10.1.1.1
The following example displays the current traffic filter:
collector02 (collector)# show traffic-filter
Name: CustomRule2, Domain: headqtrs.example.com
The following example displays the current SMB protocol parser setting:
collector02 (collector)# show protocols
The following example displays the current honeypot configuration:
collector02 (collector)# show honeypot ssh-honeypot
Table 2-28 show (collector mode)
Description
Display the currently selected traffic monitoring interface.
Product(s) CLI All-in-One | Collector
Mode(s) Collector
Syntax
collector02 (collector)#ow traffic-monitoring-ifc-type
Display the currently selected traffic monitoring interface
traffic-filter
Shows all traffic filter rules.
protocols
Shows current HTTP or SMB protocol parser settings
proxy {inside
|outside}
Shows Traffic Collector proxy for inside or outside
configurations.
honeypot
Shows the current honeypot configuration.