Juniper Advanced Threat Prevention Appliance, Cli Command Reference Manual, Page: 85 / 120

CLI Command Reference Guide
Copyright© 2018, Juniper Networks, Inc. 77
setupcheck
show (core mode)
Table 4-17 setupcheck
Description Checks and reports on basic configuration settings and analysis pipeline setup.
Product(s) CLI All-in-One | Core CM | Mac Mini OS X Detection Engine
Mode(s) diagnosis
Syntax
setupcheck {all | report | basic | analysis}
Parameters
Example
The following example checks all basic configuration settings as well as the
analysis pipeline:
JATP(diagnosis) # setupcheck all
Table 4-18 show
Description
Displays the guest image(s) status.
See Also: show (server mode); show (diagnostic mode)
Product(s) CLI All-in-One | Collector | Core CM | Mac Mini OS X Detection Engine
Mode(s) Core
Syntax
show
Parameters
Example
The following example demonstrates the show images command usage:
JATP(core)# show images
The following example shows how to get the alternate-exhaust interface (eth2)
status:
JATP(core)# show alternate-exhaust interface
all Checks both basic settings and analysis pipelin
report Shows report of last setupcheck.
basic Checks basic configuration settings.
analysis Checks the analysis pipeline.
images
Displays guest image update and status information.
whitelist
Displays the name, hit count and the time of last hit of a user
configured whitelist.
Note that when a whitelist rule is deleted, it will be removed
from the list. Updates to existing rule are not affected by the
presence of the rule in the output, but hit count could
increment. Further, more than one rule can be hit by a single
incident.
alternate-
exhaust-
interface Displays the status of the alternate exhaust interface eth2.