.06.
there are any damages or severe scratch.
·
Make sure the fixture is operated by qualified personnel who knows the fixture
before using.
·
Keep the original packages if any second shipment is needed.
·
Don’t tr y to change the fixtures without any instruction by the manufacturer or
the appointed repairing agencies.
·
It is not in warranty range if there are any malfunctions from not following the
user manual to operate or any illegal operation, like shock short circuit, electronic
shock , lamp broke, etc.
Cautions:
For added protection mount the fixtures in areas outside walking paths,
seating areas, or in areas were the fixture might be reached by unauthorized
personnel.
Before mounting the fixture to any surface, make sure that the installation area can
hold a minimum point load of 10 times the device’s weight.
Fixture installation must always be secured with a secondar y safety attachment, such
as an appropriate safety cable.
Never stand directly below the device when mounting, removing, or ser vicing the
fixture.
from a ceiling, or set on a flat level surface (see illustration below). Be sure this fixture
is kept at least 0.5m (1.5 ft) away from any flammable materials (decoration etc.).
Always use and install the supplied safety cable as a safety measure to prevent
accidental damage and/or injur y in the event the clamp fails.
Mounting points:
Overhead mounting requires extensive experience, including
amongst others calculating working load limits, a fine knowledge of the installation
material being used, and periodic safety inspection of all installation material and
the fixture. If you lack these qualifications, do not attempt the installation yourself.
Improper installation can result in bodily injur y.
Be sure to complete all rigging and installation procedures before connecting the
main power cord to the appropriate wall outlet.
INSTALLATIONS
6
MENU OPERATIONS
8
.09.
LCD DISPLAY
FUNC
UP
DOWN
ENTER
XXX°C/°F
A001~AXXX
CH14 mode
CH16
Internal Program1~8 Master/Alone
Internal Program1~8 Master/Alone
Yes/No
Wire DMX
Wireless DMX
Act WDMX & Out
Reverse PAN(On/Off)
Reverse TILT (On/Off)
Select PAN 540°/360°/630°
Select TILT 270°/90°/180°
Mic sensitivity 0~99%
XXXX(Hours)
V1.0~V9.9
On/Off
Total reset
PAN/TILT reset
Color reset
Gobo reset
Strobe reset
The Others reset
PAN=XXX……
PAN=XXX……
Yes/No
mode
DMX address
Channel mode
Auto run
Music control
Reset default
Signal set
PAN / TILT
UI SET
Lamp Hours
Temperature
Software version
Lamp
Reset
Channel
Calibration
Clear lamp time
Scan fast mode
(On/Off)
Function
mode
Option
Information
Manual
control
Advanced
(Access Code 088)
M
E
N
U
DMX address setting
Standard mode
Vector mode
Auto run
Sound control
Reset default
Wire DMX
Wireless DMX
Act WDMX & Out
Reverse PAN
Reverse TILT
PAN degree,default is 540°
TILT degree,default is 270°
Mic sensitivity
Lamp hours
Current temperature
Software version
Lamp ON/OFF
Total reset
PAN/TILT reset
Color reset
Gobo reset
Strobe reset
The others reset
Channel control
Calibration
Clear lamp time
Speed Mode
