29
v1.9
31.08.2021
7.
Reinstall / Backup & Clone / Restore
The following chapters describe the installation, the creation of a WMT backup and the restoration of a
backup (restore).
Installation / Restore
During the new installation or a restore, the WMT is reset to factory defaults or to a backup
level
Backup
A backup of the WMT and can be restored in the event of an error or the configuration of a
new WMT. Two different types of backups are distinguished:
o
Clone Master Image:
A clone master image represents a backup of an already configured WMT,
which can be played back on any number of Jungheinrich WMTs.
Important: To be able to restore the image to multiple WMTs, it has to be re-
set partially back to the delivery configuration. During the cloning process, the
following settings are reset on the Source-WMT and hence have to be manu-
ally reconfigured after the process / after the restore on the target devices:
Network configuration (LAN, Wi-Fi)
Device name
Language / Keyboard input / Current location
Device Backup Image:
A device backup image represents a 1:1 backup of a WMT, which can only be
restored to the same WMT (same serial number). A device backup image must
not be restored on multiple WMTs. To restore a backup to multiple WMTs,
please use the Clone Master Image.
Note
For a new installation as well as
a ”backup” and „restore”, the creation of an installation USB stick
required
