Jungheinrich HC 10, Operating Instructions Manual

Page: 16 / 37

C 16
0502
.GB
C Transportation and commissioning
14 Transportation by crane
m
Only use lifting gear of adequate capacity
(loading weight
= dead weight + battery weight; see truck identification plate).
A
Lifting points (1) are provided or loading the truck by means of crane gear.
– Park the truck and render it safe
(see chapter E).
– Attach the crane gear to the lifting eye
(1) (according to labelling).
m
The crane gear must be attached to the
lifting eye in such a manner that it
cannot slip!
The crane gear must be attached in
such a manner that it does not touch
any attachments during lifting.
15 Commissioning
To prepare the truck for operation after delivery or transportation, the following ope-
rations must be performed:
– Check the equipment for completeness.
– If necessary, install the battery. Make sure that the battery cable is not damaged.
– Charge the battery (see chapter D).
– Put the truck into operation in the stipulated manner (see chapter E).
A
When the truck is parked, the surface of the tyres may flatten. The flattening will dis-
appear after the truck has been operated for a short time.
C 16
0502
.GB
C Transportation and commissioning
14 Transportation by crane
m
Only use lifting gear of adequate capacity
(loading weight
= dead weight + battery weight; see truck identification plate).
A
Lifting points (1) are provided or loading the truck by means of crane gear.
– Park the truck and render it safe
(see chapter E).
– Attach the crane gear to the lifting eye
(1) (according to labelling).
m
The crane gear must be attached to the
lifting eye in such a manner that it
cannot slip!
The crane gear must be attached in
such a manner that it does not touch
any attachments during lifting.
15 Commissioning
To prepare the truck for operation after delivery or transportation, the following ope-
rations must be performed:
– Check the equipment for completeness.
– If necessary, install the battery. Make sure that the battery cable is not damaged.
– Charge the battery (see chapter D).
– Put the truck into operation in the stipulated manner (see chapter E).
A
When the truck is parked, the surface of the tyres may flatten. The flattening will dis-
appear after the truck has been operated for a short time.