![Jungheinrich ESE 420 Operating Instructions Manual Download Page 47](http://html1.mh-extra.com/html/jungheinrich/ese-420/ese-420_operating-instructions-manual_2032039047.webp)
0706
.GB
E 18
Starting the truck for the first time
After switching on the isolator and if necessary the key switch, the LED (41) turns red.
When you enter the correct operator code the LED (41) turns green.
If the wrong code is entered LED (41) flashes red for two seconds. The correct code
can then be entered.
Z
The Set key (42) has no function in operating mode
Switching off
To switch the truck off, press the
o
switch
(46).
Z
The truck can switch off automatically after a
pre-determined time. To do this, you need to
set the corresponding code lock parameter.
(see Section 7.3).
7.2
Parameters
In programming mode you can set the code
lock functions via the keypad.
Parameter Groups
The parameter number is composed of three digits. The first digit refers to the
parameter group as shown in Table 1. The second and third digits are numbered in
sequence from 00 to 99.
No. Parameter Group
0xx Code Lock Settings
(Codes, travel program release, automatic cutout, etc.)
1
2
3
4
5
6
7
8
9
0
Set
43
42
41
46
45
44
0706
.GB
E 18
Starting the truck for the first time
After switching on the isolator and if necessary the key switch, the LED (41) turns red.
When you enter the correct operator code the LED (41) turns green.
If the wrong code is entered LED (41) flashes red for two seconds. The correct code
can then be entered.
Z
The Set key (42) has no function in operating mode
Switching off
To switch the truck off, press the
o
switch
(46).
Z
The truck can switch off automatically after a
pre-determined time. To do this, you need to
set the corresponding code lock parameter.
(see Section 7.3).
7.2
Parameters
In programming mode you can set the code
lock functions via the keypad.
Parameter Groups
The parameter number is composed of three digits. The first digit refers to the
parameter group as shown in Table 1. The second and third digits are numbered in
sequence from 00 to 99.
No. Parameter Group
0xx Code Lock Settings
(Codes, travel program release, automatic cutout, etc.)
1
2
3
4
5
6
7
8
9
0
Set
43
42
41
46
45
44
Summary of Contents for ESE 420
