Jungheinrich ESE 420, Operating Instructions Manual

Page: 31 / 79

0706
.GB
E 2
2 Controls and Displays
Item Control /Display Function
1 Steering wheel
t
Steers truck in desired direction.
2 Driver’s display
t
Displays key travel and lift parameters,
warnings, notification of incorrect operation and
service displays (see Section 5).
3 Switch for driver seat
heating
o
Switches driver seat heating on and off.
4 Crawl speed control light
t
When lit, indicates that the maximum travel
speed has been reduced.
5 Crawl speed switch
t
Switches crawl mode on and off.
6 Hydraulic control button
t
Lifting and lowering, reach and rotate.
7 Warning button
t
Triggers a warning when applied.
8 Travel direction button
t
Pre-selects required direction.
9 Parking brake button
t
Applies / releases parking brake.
10 Key switch
t
To switch the battery supply to the truck on and
off.
Red key (No. 702):
- for the operator
Grey key (No. 738):
- for service and workshop
11 Main switch / isolator
(emergency disconnect)
t
The supply current is interrupted, all electrical
functions are deactivated and the truck is
automatically braked.
12 Control light -
emergency steering
mode
t
When lit, indicates that emergency steering
mode is applied.
13 Control light -
driver seat heating
o
When lit, indicates that the driver’s seat heating
is on.
14 Deadman button
t
– Deadman button pressed:
truck ready for operation.
– Deadman button released:
truck brakes.
15 Accelerator pedal
t
Controls travel speed infinitely.
16 Brake pedal
t
Truck decelerates.
17 Driver's seat longitudinal
setting
t
Set for each journey.
18 Invertebral disc support
t
The back padding can be individually set.
19 Backrest adjustment
t
The backrest on the driver’s seat can be
adjusted.
20 Driver's seat damping
t
Sets the driver's weight for optimum seat
damping. The set weight is displayed.
t
= Standard equipment
o
= Optional Equipment
0706
.GB
E 2
2 Controls and Displays
Item Control /Display Function
1 Steering wheel
t
Steers truck in desired direction.
2 Driver’s display
t
Displays key travel and lift parameters,
warnings, notification of incorrect operation and
service displays (see Section 5).
3 Switch for driver seat
heating
o
Switches driver seat heating on and off.
4 Crawl speed control light
t
When lit, indicates that the maximum travel
speed has been reduced.
5 Crawl speed switch
t
Switches crawl mode on and off.
6 Hydraulic control button
t
Lifting and lowering, reach and rotate.
7 Warning button
t
Triggers a warning when applied.
8 Travel direction button
t
Pre-selects required direction.
9 Parking brake button
t
Applies / releases parking brake.
10 Key switch
t
To switch the battery supply to the truck on and
off.
Red key (No. 702):
- for the operator
Grey key (No. 738):
- for service and workshop
11 Main switch / isolator
(emergency disconnect)
t
The supply current is interrupted, all electrical
functions are deactivated and the truck is
automatically braked.
12 Control light -
emergency steering
mode
t
When lit, indicates that emergency steering
mode is applied.
13 Control light -
driver seat heating
o
When lit, indicates that the driver’s seat heating
is on.
14 Deadman button
t
– Deadman button pressed:
truck ready for operation.
– Deadman button released:
truck brakes.
15 Accelerator pedal
t
Controls travel speed infinitely.
16 Brake pedal
t
Truck decelerates.
17 Driver's seat longitudinal
setting
t
Set for each journey.
18 Invertebral disc support
t
The back padding can be individually set.
19 Backrest adjustment
t
The backrest on the driver’s seat can be
adjusted.
20 Driver's seat damping
t
Sets the driver's weight for optimum seat
damping. The set weight is displayed.
t
= Standard equipment
o
= Optional Equipment