Jungheinrich ESE 420, Operating Instructions Manual

Page: 25 / 79

11
04
.G
B
D 2
2 Battery types
The truck will be equipped with different battery types, depending on the application.
The following table shows which combinations can be included as standard:
The battery weights can be taken from the battery data plate. Batteries with non
insulated terminals must be covered with a non slip insulation mat.
F
The weight and dimensions of the battery have a considerable affect on the
operational safety of the truck. Battery equipment may only be replaced with the
agreement of the manufacturer.
3 Exposing the battery
F
Park the truck securely (see Chapter E).
Only connect and disconnect the battery connector and the socket when the mains
and charger are switched off.
– If necessary open the door.
– Remove the hex. socket screws (1).
– Lift up the door attachment (2).
48V - PzS battery, low maintenance 560 Ah
48V - PzS battery, maintenance-free 560 Ah
1
2 3
11
04
.G
B
D 2
2 Battery types
The truck will be equipped with different battery types, depending on the application.
The following table shows which combinations can be included as standard:
The battery weights can be taken from the battery data plate. Batteries with non
insulated terminals must be covered with a non slip insulation mat.
F
The weight and dimensions of the battery have a considerable affect on the
operational safety of the truck. Battery equipment may only be replaced with the
agreement of the manufacturer.
3 Exposing the battery
F
Park the truck securely (see Chapter E).
Only connect and disconnect the battery connector and the socket when the mains
and charger are switched off.
– If necessary open the door.
– Remove the hex. socket screws (1).
– Lift up the door attachment (2).
48V - PzS battery, low maintenance 560 Ah
48V - PzS battery, maintenance-free 560 Ah
1
2 3