Jungheinrich ESE 420, Operating Instructions Manual

Page: 34 / 79

E 5
0706
.GB
Attaching the safety restraint belt
F
The safety belt (21) must be worn at all times when travelling. The belt must audibly
lock in place when closed. Place the safety belt (21) taught over your hips (not over
fixed or fragile objects in the pockets of your clothes). The safety belt (21) should be
as close as possible to your hips.
Unlocking the safety restraint belt
– Press the red button in the lock section.
F
The safety belt (21) must not jam or strike any sharp objects.
Switching on the truck
Z
When the truck is parked, the surface of the tyres will flatten. The flattening will
disappear after a short period of operation.
– Pull out the main switch / isolator (11).
– Insert the key in the key switch (10) and turn it clockwise as far as it will go to the
“I” position.
– Test the horn (7).
The truck is now operational. The existing battery capacity is shown in the driver’s
display (2).
– Check the operation of the brake pedal (15) and the parking brake (9) (see Section
4.2).
– The current steering position is shown on the driver's display (2).
2
15
7 9
8 10 11
E 5
0706
.GB
Attaching the safety restraint belt
F
The safety belt (21) must be worn at all times when travelling. The belt must audibly
lock in place when closed. Place the safety belt (21) taught over your hips (not over
fixed or fragile objects in the pockets of your clothes). The safety belt (21) should be
as close as possible to your hips.
Unlocking the safety restraint belt
– Press the red button in the lock section.
F
The safety belt (21) must not jam or strike any sharp objects.
Switching on the truck
Z
When the truck is parked, the surface of the tyres will flatten. The flattening will
disappear after a short period of operation.
– Pull out the main switch / isolator (11).
– Insert the key in the key switch (10) and turn it clockwise as far as it will go to the
“I” position.
– Test the horn (7).
The truck is now operational. The existing battery capacity is shown in the driver’s
display (2).
– Check the operation of the brake pedal (15) and the parking brake (9) (see Section
4.2).
– The current steering position is shown on the driver's display (2).
2
15
7 9
8 10 11