Jungheinrich EJD K18, Operating Instructions Manual

Page: 42 / 81

E 11
0205
.GB
5 Keypad (CANCODE) (
o
)
The keypad consists of 10 number keys, a Set
key and a
o
key.
The
o
key indicates operating statuses via a red/
green LED.
It contains the following functions:
– Code lock function (commissioning the truck).
– Setting the battery parameters, only in con-
junction with the display instrument (CANDIS
(
o
)).
The
o
switch has top priority and resets the truck from any condition to its default
condition without modifying any settings.
5.1 Code Lock
When the correct code has been entered, the machine is ready for use. You can
allocate an individual code to each truck, driver or group of drivers.
Z
When delivered from the factory, the operator code (factory setting 2-5-8-0) is
indicated on a removable sticker.
M
When starting the truck for the first time, change the master and operating codes.
(refer to section 5.4)
1 2 3
4 5 6
7 8 9
0
Set
E 11
0205
.GB
5 Keypad (CANCODE) (
o
)
The keypad consists of 10 number keys, a Set
key and a
o
key.
The
o
key indicates operating statuses via a red/
green LED.
It contains the following functions:
– Code lock function (commissioning the truck).
– Setting the battery parameters, only in con-
junction with the display instrument (CANDIS
(
o
)).
The
o
switch has top priority and resets the truck from any condition to its default
condition without modifying any settings.
5.1 Code Lock
When the correct code has been entered, the machine is ready for use. You can
allocate an individual code to each truck, driver or group of drivers.
Z
When delivered from the factory, the operator code (factory setting 2-5-8-0) is
indicated on a removable sticker.
M
When starting the truck for the first time, change the master and operating codes.
(refer to section 5.4)
1 2 3
4 5 6
7 8 9
0
Set