Jungheinrich EJD 220, Operating Instructions Manual

Page: 151 / 226

8.12.3 Changing the Set-up Code
Requirements
– The truck is switched on, see page 148.
Procedure
• Press the key below the "Settings"
symbol (94).
• Press the key below the "Change set-
up code" symbol (95).
• Enter the set-up code using the keypad
(65).
The set-up code entered is shown in
the display unit (63) as filled-in circles.
• Press the key below the "Delete"
symbol (96).
The set-up code is deleted.
• Enter the new set-up code using the
keypad (65).
Z
The new set-up code must be different
from existing access codes.
• Press the key below the "Confirm"
symbol (97).
The new set-up code is displayed.
Z
If the new set-up code has been
entered incorrectly, delete it and enter
the correct set-up code.
To return to the main menu, press the
key below the "Back" symbol (98).
The set-up code has been changed.
65
96
94
97
98
95
63
149
04.19 en-GB