![Jungheinrich EJD 220 Operating Instructions Manual Download Page 62](http://html1.mh-extra.com/html/jungheinrich/ejd-220/ejd-220_operating-instructions-manual_2032018062.webp)
Hazardous area
WARNING!
Risk of accidents/injury in the hazardous area of the truck
A hazardous area is defined as the area in which people are at risk due to travel or
lifting operations of the truck, its load handler or the load. This also includes the area
within reach of falling loads or lowering/falling operating equipment.
u
Instruct unauthorised persons to leave the hazardous area.
u
In case of danger to third parties, give a warning signal in good time.
u
If unauthorised persons are still within the hazardous area, stop the truck
immediately.
Safety devices, warning signs and warning instructions
Safety devices, warning signs (see page 29) and warning instructions in the present
operating instructions must be strictly observed.
WARNING!
Removing or disabling safety devices can cause accidents
Removing or disabling safety devices such as the Emergency Disconnect switch,
key switch, buttons, horn, strobe lights, mast protection pane, mast grille, sensors,
panels etc. can result in accidents and injury.
u
Report any defects immediately to your supervisor.
u
Mark defective truck and take out of service.
u
Do not return the industrial truck to service until you have identified and rectified
the fault.
60
04.19 en-GB
Summary of Contents for EJD 220
