Jungheinrich EJB 14, Operating Instructions Manual

Page: 44 / 49

F 7
099
9.G
B
5.1 Operating material
Handling operating material: Consumption type material must always be handled
properly. Manufacturer's instructions to be observed.
f
Improper handling endangers health, life and environment. Operating material must
only be stored in containers conforming to specification. They might be inflammable
and must not come into contact with hot components or open fire.
When filling in consumption type materials, use clean containers only. It is prohibited
to mix consumption type materials of different grades or qualities, except if mixing is
expressively prescribed in these operating instructions. -This instruction may only be
ignored, if another mixing ratio is explicitly prescribed in this manual.
Avoid any spilling. Spilled liquid must be removed immediately using a suitable bin-
ding agent, and the mixture of consumption type material and binding agent is to be
disposed of according to the regulations.
Code Order-no. Supplied
quantity
Description Used for:
A 092 006 708 5.0 l H-LP 46, DIN 51524 Hydraulic system
B 092 006 801 5.0 l CLP 100, DIN 51517 Transmission
C 092 008 102 5.0 l H-LP 10, DIN 51524 Transmission
hydraulic system
E 092 014 307 1.0 kg Grease, DIN 51825 Lubrication service
F 092 001 006 1.0 kg Grease, TTF52 Lubrication service
Grease standard values
Code Type of
Saponification
Dropping
point
°
C
Worked penetration
at 25
°
C
NLG1
Class
Service
temperature
°
C
E Lithium 185 265 - 295 2 -35/+120
F -- -- 310 - 340 1 -52/+100
F 7
099
9.G
B
5.1 Operating material
Handling operating material: Consumption type material must always be handled
properly. Manufacturer's instructions to be observed.
f
Improper handling endangers health, life and environment. Operating material must
only be stored in containers conforming to specification. They might be inflammable
and must not come into contact with hot components or open fire.
When filling in consumption type materials, use clean containers only. It is prohibited
to mix consumption type materials of different grades or qualities, except if mixing is
expressively prescribed in these operating instructions. -This instruction may only be
ignored, if another mixing ratio is explicitly prescribed in this manual.
Avoid any spilling. Spilled liquid must be removed immediately using a suitable bin-
ding agent, and the mixture of consumption type material and binding agent is to be
disposed of according to the regulations.
Code Order-no. Supplied
quantity
Description Used for:
A 092 006 708 5.0 l H-LP 46, DIN 51524 Hydraulic system
B 092 006 801 5.0 l CLP 100, DIN 51517 Transmission
C 092 008 102 5.0 l H-LP 10, DIN 51524 Transmission
hydraulic system
E 092 014 307 1.0 kg Grease, DIN 51825 Lubrication service
F 092 001 006 1.0 kg Grease, TTF52 Lubrication service
Grease standard values
Code Type of
Saponification
Dropping
point
°
C
Worked penetration
at 25
°
C
NLG1
Class
Service
temperature
°
C
E Lithium 185 265 - 295 2 -35/+120
F -- -- 310 - 340 1 -52/+100