Jungheinrich EJB 14, Operating Instructions Manual

Page: 22 / 49

D 3
069
9.G
B
4 Charging the battery
As default, the truck is to be loaded with a stationary battery charger.
m
For recharging the battery, the truck has to parked in-doors in a sufficiently ventilated
environment.
– Park the truck and render it safe (see chapter E).
m
Connection / disconnecting battery connector and socket as well as pressing the ma-
ster switch (2) may only be performed with truck and battery charger being switched
off.
– Expose the battery (see section 3).
f
During the recharging operation the tops of the battery cells must be exposed to en-
sure adequate ventilation. Metal objects must not be placed on the battery. Prior to
starting the recharging operation, check all cable connections and plugged connec-
tions for visible damage.
The safety instructions provided by the battery supplier and battery charger supplier
must be strictly observed.
– Pull battery connector (3) from the plug and socket connection of the truck.
– Remove insulation mat from battery, if necessary.
– Connect the charging cable (4) of the battery recharging station with the battery
connector (3) and switch on the battery charger.
m
Recharge the battery observing the instructions provided by the battery supplier and
by the battery charger supplier.
D 3
069
9.G
B
4 Charging the battery
As default, the truck is to be loaded with a stationary battery charger.
m
For recharging the battery, the truck has to parked in-doors in a sufficiently ventilated
environment.
– Park the truck and render it safe (see chapter E).
m
Connection / disconnecting battery connector and socket as well as pressing the ma-
ster switch (2) may only be performed with truck and battery charger being switched
off.
– Expose the battery (see section 3).
f
During the recharging operation the tops of the battery cells must be exposed to en-
sure adequate ventilation. Metal objects must not be placed on the battery. Prior to
starting the recharging operation, check all cable connections and plugged connec-
tions for visible damage.
The safety instructions provided by the battery supplier and battery charger supplier
must be strictly observed.
– Pull battery connector (3) from the plug and socket connection of the truck.
– Remove insulation mat from battery, if necessary.
– Connect the charging cable (4) of the battery recharging station with the battery
connector (3) and switch on the battery charger.
m
Recharge the battery observing the instructions provided by the battery supplier and
by the battery charger supplier.