junger T-AP, Manual, Page: 25 / 68

T*AP
21
setup GUI – SYSTEM – SNMP
This pane is meant for basic settings of the SNMP Agent of the device. If you are not familiar with the use of
SNMP protocol for system monitoring you should not enable the SNMP agent.
setup GUI – SYSTEM – Backup / Restore
Here you can backup the complete device and restore parts or all of it .If you press
the device
controller will collect all necessary data and assemble it to an XML file. Finally you will get a pop up message:
You must select :
<Save File>.
After pressing <OK>, the
system file dialog opens :
Select a folder
and alter that default file name
if needed.