4. OPERATION
18
The filter processor e07 offers a convenient timecode snapshot
automation. Following parameters will be stored as snapshot.
equaliser bands (also dynamic equaliser)
low cut / high cut filter
output gain
bypass functions .
Until 50 snapshots can be stored into the edit list (EDL).
EDL can only used in the channel status of first generated
entry (stereo or 2-channel mode). In case of working in
another mode as the original EDL mode only the CLEAR
function is available. After clearing the EDL one can
generate a new EDL.
In 2-channel mode both parameter sets for left and for right
channel are stored as one snapshot.
Without timecode the snapshot edit list (EDL) can be used as
event list. Events are arranged by time code values.
MODE
Selection of MAINMENU
SNAP SHOT
Selection of SNAPSHOT MENU
CAPT ON
CAPTURE button activated
Red LED in CAPTURE button blinks!
CAPTURE
Storing (freeze) of actual equaliser
parameter set with present timecode into
EDL, arranged by timecode value
automatically
display:
CAPTURE OK!
Note: All snapshots in the EDL will be arranged by time code automatically.
The record of a new take will be inserted in the EDL in order of stored
timecode values automatically.
MODE
Selection of MAINMENU
SNAP SHOT
Selection of SNAPSHOT MENU
CAPT OFF
CAPTURE button disactivated
Red LED in CAPTURE button is erased!
Capture mode is disactivated automatically by switching power off.
(Capture mode is not stored for restart of the unit.)
4.7
SNAPSHOT
AUTOMATION
GENERATING
SNAPSHOTS BY
CAPTURE MODE
(only working
with timecode!)
DISACTIVATING
CAPTURE MODE
pus h
pus h
pus h
pus h
pus h
pus h
pus h
CAPTURE mode
