4. OPERATION
14
The filter processor e07 offers a convenient preset storage
system for saving and loading of parameters. Following
parameters are stored in presets:
equaliser bands (also dynamic equaliser)
2-channel mode equaliser bands
low cut / high cut filter
output gain (also for 2-channel mode)
bypass functions (also for 2-channel mode).
Until 50 presets can be stored into the unit. In 2-channel mode
both parameter sets for left and for right channel are stored in
one preset.
Presets can be named by the user.
Presets can be used for A/B comparison and for snapshot
automation.
Display above MODE button
P**
preset no.** loaded (into A or B)
MODE
Selection of MAINMENU
SAVE PRST
Selection of PRESET - SAVE MODE
display:
SAVE
ð
PRST
** <name P**>
[** = number of last loaded preset (or 01, if
no preset was loaded before)]
FREQ/ENTER
Selection of preset number xx for parameter
(low section)
saving.
display:
SAVE
ð
PRST
xx <name Pxx> or
st data
or
2-ch data
Attention!
Preset was used before and will
be overwritten after saving.
or
SAVE
ð
PRST
xx
NO DATA
Free preset for data saving (unused before).
FREQ/ENTER
Saving of actual parameter set into preset
xx
(low section)
Push two times to save with default name.
display:
NAME
PRST
xx
P R E S E T X X
or
ALL KNOBS
Changing of the default name (PRESETxx)
(low RANGE
into an individual name (10 digits), push the
... output GAIN)
knobs to generate space
FREQ/ENTER
Saving preset xx with individual name
(low section)
4.6
PRESETS
STATUS DISPLAY
SAVING PRESETS
(saving of actual
work parameter
[memory A or B]
into preset xx)
pus h
pus h
turn
pus h
turn
pus h