C8000
Frame Controller
C8702
digital audio
modular
processing system
Page 8/23
Web technology based GUI
The
GUI
is based on common web technologies so you can display it nearly everywhere.
External Ethernet based access to the Junger devices is maintained by a dedicated 32Bit
communication processor
that is part of the
C8702 Frame Controller
module.
The
communication processor
does not control the module parameters directly. It transfers
commands and data from and to a
module control processor
which on the other hand controls the
module parameters as well as
GPI/O
s. The
module control processor
and the
communication
processor
both communicate via the
CAN bus
internally. Therefore the external communication is
shielded somewhat from the audio processing by this two tier approach. I.e. you can update the
firmware of the
Frame Controller
without disturbing the audio processing.
The
communication processor
runs a
HTTP and
an
UDP
server. You may also activate a
Telnet,
an
Ember server
and a
Proxy
to communicate with the
brc
remote controller.
As a fee-based option you may activate a
SNMP agent
as well.
Over a serial 1:1 connection (RS232: 115200, 8, N, 1, no protocol) you will gain access to the
console interface
(see IP set up above). It offers low level communication for administrative,
service and testing purposes. The functions available from the console interface may very from
different
Frame Controller
firmware versions.
RS232
LAN
DSP
* LevelMagic
* AudioFail
* MixMatrix
module
control processor
Audio I/O
Bus
selector
c
8
k
f
ra
m
e
i
n
te
rn
a
l
C
A
N
b
u
s
CAN
M
C
F
5
2
8
2
C
V
T
6
6
C8702 Frame Controller
Example C8k module
communication processor