C8000
Frame Controller
C8702
digital audio
modular
processing system
Page 17/23
Modules firmware update
Modules firmware update will normally be done via the
Bulk Updater
software.
If there is the need for special firmware combinations or you don’t want to use the latest firmware for
any reason, you can make use of the
MODULE FIRMWARE SINGLE UPDATE
function. This function
gives you a drop down list of the modules of a frame, their addresses and their actual firmware.
Important Note!
Before you update any module firmware and a new image comes with the module
firmware archive, you must update the
Frame Controller
. Otherwise the GUI may show incorrect module
control pages or the module is displayed in orange or red color.
This is a basic tool and it needs a bit of care when using it. You must update module by module and for
each module you must choose the respective part of the firmware, all one by one.
Select module to update
[address:type actual firmware] module name
module controller firmware is indicated by
C:xx
DSP firmware is indicated by
DSP:xx
FPGA firmware by
FPGA:xx
SDI firmware is indicated by
SDI:xx
NXP processor based modules C:xx DSP:xx FPGA:xx
Select firmware to update
[Controller (*.bin)]
[DSP (*.can)]
[FPGA (*.pga)]
[SDI (*.sdi)]
[Controller, DSP, FPGA, SDI (*.nxp)]
Select firmware file
You must browse for the location of the respective file
(where you have unpacked the archive or where a single file
received from Junger is stored).
Important Note!
It is not possible to select a firmware file directly from an archive folder.
You must unpack that archive in order to use the individual firmware file(s).