C8000
Frame Controller
C8702
digital audio
modular
processing system
Page 7/23
Important Note!
If the
C8702
has an unknown IP configuration you may initialize it to factory default
settings (see above). This will restore the factory default IP configuration.
2.3 Open a browser and enter the default IP address in the URL field:
2.4 On the web site click on the
spanner tool
This opens the
“SYSTEM CONFIG”
tab of the Frame
CONTROLLER
setup.
2.5 Enter the desired
NETWORK
configuration:
2.6 Press
<CHANGE NETWORK CONFIGURATION>
2.7 Reboot the C8702:
In order to make the IP configuration permanent you must reboot the frame controller.