4. OPERATION
operation manual b40, chapter 4 -Operation- page 4-4
OUTPUT buttons 1/2 or 3/4 are switching the related output
signal to the meter display in this section.
The meter display does not allow a precise adjustment, but it
does give an indication of the existence and the level of digital
output signals.
If excessive level at the output occurs (if digital audio samples
at the maximum permissable positive or negative sample value
occur at the digital output) then the red clip-LED at the
extreme right-hand end of the level meter lights up and indicates
overloads which are present in the output signal.
4.8
MONITOR
push
1/2 or 3/4
selection of output meter signal
4.9
BYPASS
BYPASS is bypassing the signal processing of the unit.
BYPASS is working for all configurations.
push
BYPASS
switching bypass on or off
display: red LED is lighting