2. FUNCTION DESCRIPTION
The audio chain of the processing is
configurable through the user to extend the
possible applications of the device.
Changing the audio chain means to move the
filter block in one of four possible positions.
The selection is to do by calling the CONFIG
menu.
CONFIGURABLE AUDIO PATH
2.4
FLT-EXP-COMP-GAIN-LIM
EXP-FLT-COMP-GAIN-LIM
EXP-COMP-GAIN-LIM
FLT
EXP COMP-GAIN-LIM
FLT
INSERT ROUTING
2.5
It is possible to have an insert for the audio
signal to slave external devices into the signal
path of the unit.
Insert send and return are fixed before the
compressor block.
Insert is not available if 2-wire interfacing is
used. Insert is displayed in CONFIG menu.
INS
FLT-EXP COMP-GAIN-LIM
INS
EXP-FLT- COMP-GAIN-LIM
INS
EXP-
COMP-GAIN-LIM
FLT
INS
EXP
COMP-GAIN-LIM
FLT
96 KHZ INTERFACING
2.6
ACCENT processor supports two methods of
transport of digital audio signals with more than
48 kHz sampling rate. Both interface modes -
2-wire at normal sample rate or high speed
interface- are available. Interface assignment
is to set in setup menu. 2-wire interface and
digital insert can’t be used at the same time.
2-wire = 2 AES/EBU-lines, one for each
channel, clocked with the half of the original
sample rate
high speed = 1 AES/EBU-line with two
channels of audio, clocked with original sample
rate
ACCENT2 processor is equipped with analog
inputs and outputs.
These are made by using sophisticated state-
of-the-art A/D-converters and D/A-converters
developed by Jünger Audio. The converters
can run with sample rates up to 96kHz
supporting true 24bit wordlength.
ANALOG INPUTS AND OUTPUTS
2.7
The exeptional high quality of the converter
modules and their reliability guarantees most
accurate conversion for a long term of use of
the unit. ACCENT processor is useful as
standard high-quality A/D-converter for
conversion and processing of audio material
for all existing and future available digital audio
distribution formats.
operation manual accent2, chapter 2 -Function description- page 2-7