19
Setting parameters with DIP switches
1. Select parameter
Set DIP switches 1, 2 and 3, that the parameter to be
changed has been selected.
(see
Fehler! Ungültiger Eigenverweis auf Textmarke.
).
1 2 3
2. Set value
Set switches 4, 5 and 6 in accordance with the
desired value.
4 5 6
3. Activate
parameter mode
Set
switch 8 to ON
.
Nameplate illumination flashes quickly
(0.125 s On / 0.125 s Off).
4. Apply parameter
Pressing any bell button saves the desired value for the
parameter being set. An acknowledge tone sounds as
a confirmation.
5. Deactivate parameter mode
Set
switch 8 to OFF
.
Nameplate illumination: ON.
Note:
To set additional parameters, repeat steps
1 – 5. Otherwise continue with step 6.
6. Set the original button layout
After setting the parameters, reset the DIP switches
according to the button layout.
