12
Setting the button layout
The button layout can be configured using the DIP switch.
To set the button layout, DIP switch 8 must be in the OFF position.
!
If the button layout is not set for 1-gang and 2-gang buttons, there will be mal-
functions during operation.
!
When the button layout is changed, all of the bell buttons have to be deleted.
All bell buttons are assigned with the light switching function.
DIP switch cover
•
Open the device if necessary.
•
Remove the cover over the DIP switches.
Buttons
1-gang button
Button occupies 4 plug-in positions
and covers 3 gaps.
2-gang button
Button occupies 2 plug-in positions
and covers 1 gap.
4-gang button
Button occupies 1 plug-in position and
does not cover any gap.
1-gang button
2-gang button
4-gang button
